Angry Audio Studio Signal (Tally) Lights & Gadget

Description

Studio Lights – Available in five sizes with one to five colored segments. The red segment tells everyone you’re on the air. The other colored segments can be used to indicate just about anything. A flashing light can replace a ringing phone. Another light can warn talent of an upcoming break. You’ll be coming up with plenty of your own bright ideas. Each colored ring is lit with multiple long-life, energy-efficient LEDs. Each segment is individually programmable to illuminate steadily, flash, or to appear to rotate. The molded enclosure is made out of strong ABS plastic and mounts easily on your tabletop; simply drill a hole in the table for the cable, and use the included screws to secure the Light. The Studio Signal Light is a really bright idea. Imagine one of these in every control room and every studio to give visual cues to talent and operators as needed.

Studio Lights Instruction Manual

Mic Talley Gadget – The Mic Tally Gadget controls those tally lights. The 5-pin XLR connectors carry the microphone audio and the signal voltage for the tally light. The microphone signals are passed through to your preamps via RJ45 connectors in the StudioHub+ format. If you’re using an Axia xNode or a Wheatstone blade, a shielded CAT-5 patch cable is all you need for the preamp connection. The Mic Tally Gadget can control four mic arm tallies at once. Each position has its own logic connector so you can use your console logic to turn on the lights. Each tally can be red or white. Some engineers will use one color to signify on-air and another color for ready, talk signaling, or some other bright idea. Front panel switches can be used to manually control the tally lights.

Mic Talley Instruction Manual

See more details HERE!

Additional information